27" Apple iMac A1419LCD Screen Adhesive Strip Sticker Tape 076-1437 076-1422
This high quality LCD screen adhesive strip sticker tape is perfect adhesive for iMac A1419 27" recommended to use when opening or repairing the screen.
Removing the display requires cutting through the adhesive around the perimeter of the screen. After the adhesive is cut, it cannot be used to re-seal the display in place, so you'll need to apply a new set of adhesive strips.
These adhesive stickers are designed for A1419 and will NOT work for A1418.
Compatible with:-
• iMac 27” A1419
• iMac13,2 Late 2012: MD095LL/A (2.9 GHz Core i5)
• iMac13,2 Late 2012: MD096LL/A (3.2 GHz Core i5)
• iMac13,2 Late 2012: MD096LL/A (3.4 GHz Core i7)
• iMac14,2 Late 2013: MD088LL/A (3.2 GHz Core i5)
• iMac14,2 Late 2013: MD089LL/A (3.4 GHz Core i5)
• iMac14,2 Late 2013: MD089LL/A (3.5 GHz Core i7)
• iMac15,1 Retina 5K Late 2014: MF886LL/A (3.5 GHz Core i5)
• iMac15,1 Retina 5K Late 2014: MF886LL/A (4.0 GHz Core i7)
• iMac15,1 Retina 5K Mid 2015: MF885LL/A (3.3 GHz Core i5)
• iMac17,1 Retina 5K Late 2015: MK462LL/A (3.2 GHz Core i5)
• iMac17,1 Retina 5K Late 2015: MK482LL/A (3.3 GHz Core i5)
• iMac17,1 Retina 5K Late 2015: MK482LL/A (4.0 GHz Core i7)
Includes:-
1 x Set of Adhesive Strips
Important Note: -
Opening your Device will void your Warranty; We cannot be held responsible for any damage occurred during your repair process. Please feel free to contact us for further information.
- VHB (Very High Bond) display tape repair kit for all the 21.5" iMac ranges.
- Please Note: Removing and refitting the display on this range of iMac is not recommended without previous training or knowledge, as it is a difficult job to undertake. VHB strips are a very thin layer of foam between two self-adhesive plastic strips. A special tool with disposable cutting disks is used to cut the foam layer when removing the display and therefore this kit will be needed each time the display assembly is removed and refitted.
- Please also note: For iMac 4K models: strip completely covers the microphone and the holes in front of it which can deaden any sound picked up. Knowing this, the solution is simple. Make sure the microphone works properly before using any adhesive. Then, apply the adhesive strips, but when laying down the bottom strip, cut away the portion covering the microphone (and a little bit more from each side to be safe).
- Condition: Brand New OEM - Lifetime warranty on the adhesive stickers following correct installation and procedure
- Part Number(s) : 076-1437, 076-1416, 076-1422, 946-4469, 946-4471, 946-4472, 946-4468, 946-4470, 946-5035, 946-5036